Veris-industries VWG-40 Install Manuale Utente

1VWG-40 Viconics Wireless Gateway Hardware Installation Guide (Issue Date September 24, 2008 – 028-0179 R8) Product overview The VWG-40 and rel

10 2) Apply Power Apply power to the VWG by plugging in the power plug into either the VWG (if wall mount AC adapter VWG-PS-AC) or the 24Vac-powered

11Using Status LEDs The VWG controller includes several LEDs that can help determine the status of the unit. They are loca

12 2) Required Battery Maintenance Battery life expectancy is a function of its discharge cycles (the number of discharges and their depth) and the

13 Canadian Department of Communications( ICES-003) This digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Re

2 Disclaimers NO WARRANTY. Viconics, Inc. ( herein after referred to as “Viconics” ) makes no warranty as to the accurac

3 Overview This document covers the mounting and wiring of the Viconics VWG-40 series product. It assumes that you are an

4 Material and Tools Required The following tools and supplies may be required for installation: • DIN rail, type NS35/7.5 (35mm x 7.5mm), recomm

5 Mounting Mount the VWG in a location that allows clearance for wiring, servicing, and antenna removal. Environmental R

6 Removing and Replacing the Cover You must remove the VWG cover to connect the battery (new unit) or to replace the battery. The cover snaps onto

7Board Layout Figure below shows the location of LEDs, connections and other features of the VWG with the cover removed. Wirin

8VWG-PS-AC 120 Vac Wall mounted power supply module Both the U.S. and International models of wall power modules are self-contained

9RS485—BACnet MS-TP wiring. An RS485, optically isolated port uses a 3-position, screw terminal connector and always operates as COM2. Wire to th