Veris-industries H535NS Install Manuale Utente Scaricare il pdf

CURRENT MONITORING

INSTALLATION GUIDE

Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

• Follow safe electrical work practices.

See NFPA 70E in the USA, or applicable local codes.

• This equipment must only be installed and serviced by qualiﬁed electrical personnel.

• Read, understand and follow the instructions before installing this product.

• Turn oﬀ all power supplying equipment before working on or inside the equipment.

• Use a properly rated voltage sensing device to conﬁrm power is oﬀ.

DO NOT DEPEND ON THIS PRODUCT FOR VOLTAGE INDICATION

• Only install this product on insulated conductors.

Failure to follow these instructions will result in death or serious injury.

DANGER

H535NS

53 5NS

NOTICE

• This product is not intended for life or safety applications.

• Do not install this product in hazardous or classiﬁed locations.

• The installer is responsible for conformance to all applicable codes.

• Mount this product inside a suitable ﬁre and electrical enclosure.

Enclosed Relay

Installer’s Speciﬁcations

Sensor Power Induced from the monitored conductor

Amperage Range 0.25 to 15 A

Frequency Range 50-60 Hz

Operating Temperature Range -15° to 50°C (5° to 122°F)

Operating Humidity Range 10-90%, noncondensing

Wire to Relay Contacts Use 12 AWG (3.3 mm2) wire or larger*

Relay Switching Capacity at 120 VAC 1 HP

Relay Switching Capacity at 277 VAC 1.5 HP

Relay Output SPDT, 15 Amps

Relay Coil 24 VAC/DC; 36 mA nom.

Terminal Block Torque Relay control terminals: 3.5 in-lb (0.4 N-m)

All other terminals: 12 in-lb (1.35 N-m)

Agency Approvals UL508, Installation Category III

* For current loads up to 10 A, use 75°C rated wire insulation. For loads greater than 10 A, use

90°C rated wire insulation.

The product design provides for basic insulation only.

dimensions

quick install

1. Disconnect power sources prior to installation.

2. Remove the sensor lid. Wire the command relay connections and relay controls to

the base.

3. This device has four wiring options, detailed on page 2-3 of this installation guide.

Choose the option appropriate to the application and follow instructions.

2.13"

(55 mm)

1.16"

(30 mm)

4.25"

(108 mm)

1.53"

(39 mm)

Wire

Opening

Wire

Opening

Wire

Opening

1.16"

(30 mm)

4.25"

(108 mm)

operation

The H535NS is an enclosed switching relay that is connected in series between the

power source and the motor device. It operates at amperage loads up to a maximum

of 15A, and the relay controls the on/o functioning of the motor. The H535NS

requires no additional power source for operation.

1 2 3

Sommario

Pagina 1 - Enclosed Relay

Pagina 2 - INSTALLATION GUIDE

Pagina 3 - Wiring example

Commenti su questo manuale

Nessun commento

Veris-industries H535NS Install Manuale Utente

Navigare online o scaricare Manuale Utente per Apparecchiature Veris-industries H535NS Install. Veris Industries H535NS Install User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Apparecchiature Veris-industries H535NS Install